Pro AV Catalog
Request Quote
All Products

2x1 4K Ultra HD Multi-format HDBaseT Wallplate Transmitter with Scaler, Auto-switching and POH

Model: EXT-UHDV-WP-HBTLS-TX

  • Supports 300 MHz TMDS Clock and data throughput of up to 10.2Gbps
  • Automatic switching of 4K HDMI and VGA
  • Manual switching of 4K HDMI and VGA via front panel button or RS-232
  • VGA scaling up to 1920 x 1200 with picture adjustments
  • Analog L/R audio input for VGA
Compare
Project List
Product Info
Tech Specs
Documents

The Gefen EXT-UHDV-WP-HBTLS-TX is a high-performance solution in standard US electrical wall-plate form factor for switching 4K Ultra HD HDMI and VGA inputs, and extending them up to 70 meters (230 feet) at 1080p and 40 meters (130 feet) at 4K, over a single CAT-5e cable. Switching between the HDMI and VGA can be set to Automatic or be done manually via the front panel button or RS-232. It supports 10.2 Gbps of data throughput and 300 MHz TMDS Clock frequency, accepting HDMI 2.0 signals up to 4K 60 Hz 4:2:0 or 4K 30 Hz 4:4:4. This extender uses Gefen’s implementation of the HDBaseT™ technology with enhancements such as Advanced EDID Management. The HDMI input accommodates resolutions up to 4K Cinema-DCI (4096 x 2160 to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP 1.4. Highest performance multichannel digital audio including 7.1 channels of LPCM and HBR (High Bit Rate) digital audio formats, such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ are passed through to the HDMI output. The VGA input features a companion L/R analog audio input, and accepts VESA and CEA resolutions up to WUXGA (1920 x 1200 to 60 Hz, 4:4:4) and 1080p Full HD (1920 x 1080 at 60 Hz, 4:4:4). A powerful built-in scaler can upscale lower resolution VGA signals with legacy aspect ratio to widescreen WUXGA, ensuring stunning presentations and smooth switching transitions between the HDMI and the VGA sources.

  • Supports 300 MHz TMDS Clock and data throughput of up to 10.2Gbps
  • Automatic switching of 4K HDMI and VGA
  • Manual switching of 4K HDMI and VGA via front panel button or RS-232
  • VGA scaling up to 1920 x 1200 with picture adjustments
  • Analog L/R audio input for VGA
  • RS-232 control of switching, scaler, and EDID management functions
  • Bi-Directional RS-232 extension when used with a compatible Receiver
  • Power over HDBaseT™ (POH) provides power to the Sender from a compatible Receiver over the link cable
  • Sender can also be locally powered using the 2-pin Phoenix connector on back panel
  • Uses Gefen’s implementation of HDBaseT™ technology with enhanced features
  • Advanced EDID Management for rapid integration of source and display
  • Field-updateable firmware via mini-USB port, using the Gefen Syner-G™ software
  • North American standard 2-gang wall-plate form factor
  • Works with most standard North American 2-gang Decora® wall-plates (white wall-plate is included)
  • Works with most North American 2-gang table boxes and “open-back” low-voltage installation brackets
 
Request Quote
 

Suggested Products