Switcher ideal for mission critical applications. All boards are fully accessible from the front of the router and the back plane is completely passive. This ensures minimal downtime in the unlikely event of a failure. The Ponderosa is available in 4RU 64x64 frame sizes and is expandable by 8 input and/or 8 output increments, allowing the Ponderosa to grow with HD needs.
Max. Data Rate - 3Gbps
HD-SDI/SDI - Multi-format flexibility with intelligent reclocking options
Modular Configurations - Expand by 8 input and/or 8 output increments using any of the following Input/Output board options:
3G HD-SDI input/output cards (Coaxial BNC)
Fibre optic input/output cards (Single Mode LC)
A-to-D Input card (Coaxial BNC) for conversion of Comosite NTSC/PAL to 270Mbps SDI
D-to-A output card (Coaxial BNC) for conversion of 270Mbps SDI to composite NTSC/PAL
Front Loading & Hot-Swappable Modules - Video I/O boards, Crosspoint board, CPU board, and power supplies
Completely Passive Back Panel With No Active Components To Fail
7 Year Warranty
Control Features
MediaNAV™ Advanced Control Interface as Standard - Browser based GUI with user access control, control of multiple Sierra Multi-Viewers, Routers and control panels. Touch and click compatible for devices such as Tablets and Smartphones
Ethernet - Supports TCP/IP protocol via rear panel RJ-45 connector
RS-232/422 Serial Control
RS-485 to Sierra Hardware Control Panels
Options
RPS - Optional Redundant Power Supply
Fan Sled - Required if RPS is not Installed
Input
Fiber Input Module - 8-Input Fiber Optic Module
BNC Input Module - 8-Input BNC Coax Module
A-D Input Module - 8-Input Analog to Digital Module. (Composite NTSC/PAL to 270Mbps SDI)
Output
Fiber Output Module - 8-Output Fiber Optic Module
BNC Output Module - 8-Output BNC Coax Module
D-A Output Module - 8-Output Digital to Analog Module. (270Mbps SDI to composite NTSC/PAL)
Remote Control Panels - Via RS-485
Companion Audio
Yosemite 64 Frame - 8 Configurations -
Mono: 32x32 to 64x64 by 32 input and/or 32 output increments
Stereo: 16x16 to 32x32 in 16 input and/or 16 output increments
Front Loading & Hot-Swappable Modules
Routing Type - Audio
Routing Type - Video
Switcher Type - Audio
Switcher Type - Video
Matrix Switcher Video Input Type - HD-SDI
Matrix Switcher Video Input Type - SDI
Matrix Switcher Video Input Type - Other
Matrix Switcher Audio Input Signal Type - Stereo Audio
Warranty - Yes
Rackmountable - Yes
Spec Sheet available - Yes
Depth:
20.30 in
Height:
7 in
Output:
Video Level: 800mV p-p +/- 10%
Return Loss:<-20dB up to 2.9GHz
Rise/Fall Times:< 0.4 nsec for 270 Mbps SDI and < 135 psec for HD-SDI
Fiber Optic Module : Modules accept 8 fiber optical connectors
Connector Type : LC
Fiber Type : Single mode
Wavelength : 1310 (nm)
Data Rates : 50Mbps – 3Gbps
Min. Optical Input/Output Power : -5dBm
D to A Output Module Return Loss : < -30db @ 5 MHz
Differential Gain : +/- 0.3 % @ 3.58 MHz or 4.443MHz
Differential Phase : +/- 0.5 Deg @ 3.58 MHz or 4.443 MHz
Connector Type : BNC
Storage Temperature:
-40 to +150 °F
Width:
19 in
Regulatory Compliance:
WEEE
Humidity:
10 to 90 % (Non-condensing)
INPUT:
Video Level : 800mV p-p +/-10%
Return Loss : < -20dB up to 2.97GHz
Cable Equalization Range :
0-100 meters for SMPTE 292M, 424, or 372M, Belden 1694A
0-300 meters for all other standards, Belden 1694A
Connector Type : BNC
Control Features:
Serial:
3 general purpose 9 pin-D
Each switchable RS-232 or RS-422
9600, 38400, 115200 baud
Serial Protocols : SVS host
Ethernet :
10/100 Base-T, full duplex
RJ-45 connector
Ethernet Protocols : ARP, ICMP, TCP/IP, Telnet, HTTP
Web Server : With MediaNAV™ Router control interface as standard
Control Panels : Supports full line of SCP remote control panels
Legacy SVS Product Control : 25 pin-D J1 expansion port, up to 8 additional signal levels